Garden Ornament and Pottery Sealer
A fast drying, water-based sealer with a clear glossy finish. Sealed surfaces are more resistant to molds and lichens. When sprayed on pots it will also reduce moisture loss through the side of the pot (so your mix needs less watering) and helps preserve glazed surfaces for longer.
Used to protect:
- Ceramic and other Garden Pots
- Bird Baths
- Carved Limestone
- Other poruse surfaces such as bricks
Clean surfaces of contaminants such as mould or lichen as well as any dirt, dust and grease. Wet surface with a scrubbing brush, rinse and allow to thoroughly dry.
Spray until all the surface has been evenly covered. Leave to dry, this usually takes around 20 minutes, and then apply second coat.
Note: Do not apply if rain is imminent, if it is below 10C or if Humidity is above 85%.
Coverage: This varies depending on how porous the surface but is generally around 10-12m2/L